AKEMI EPOXY MASTIC

The special adhesive system for
the stone processing industry.


 

As a result of a long run research work done by
AKEMI, an assort-ment of improved and
new AKEPOX products has been developed.
The 2-component adhesive system
is distinguished by its high properties
for the specific fields of application,
especially for outdoor use.

 


Properties: ...ggood adhesion on humid stones,
                                 alkali-stable, almost no shrinkage
                                 during hardening, low tendency to
                                 fatigue, hight mechanical properti-
  
   ....     ....  ......       es,weather resistant
               
..                 bondings.
................


AKEPOX
2000

 

Liquid, for laminating work (sandwich bondings),
filling offissures and work on horinzontal surfaces,
easy colour macthing

Working time: 20-30 min


Hardening time: 12-16 hrs


Bending strength: DIN 53452 .......... 100- 110 N/mm^2


Tensile strength: DIN 53455 ..............50 - 60 N/mm^2


E-module:  ......................................3000 - 3500 N/mm^2


600 g-ref.-no 106 17
1.5 g-ref.-no 106 18
.

AKEPOX
2010
Gelly-like, for fine bonding joints, especially where
jointsshould be invisible, for work on vertical
surfaces, easy colour matching.

Working time: 20-30 min


Hardening time: 12-16 hrs


Bending strength: DIN 53452 ............100- 110 N/mm^2


Tensile strength: DIN 53455 ...............60 - 70 N/mm^2


E-module:  ......................................3500 - 4000 N/mm^2


450 g-ref.-no 106 16
2,25 g-ref.-no 106 23
15 g-ref.-no 106 24

AKEPOX
2020
Viscous, for filling of joints, casting of steel
reinforcements,bondings on horizontal surfaces,
levelling of irregularities,good adhesion on metal.

Working time: 40-50 min


Hardening time: 12-16 hrs


Bending strength: DIN 53452 ...........50 - 60 N/mm^2


Tensile strength: DIN 53455 ..............20 - 30 N/mm^2


E-module:  ......................................5500 - 6000 N/mm^2


750 g-ref.-no 106 10
3 g-ref.-no 106 20
22,5 g-ref.-no 106 21

AKEPOX
2030
Creamy, high non-sag properties, easy colour
matching, for bondings on vertical surfaces,
filling or bore-hotels for anchors, good
adhesion on metal, rapid herdening.

Working time: 20-30 min


Hardening time: 8-10 hrs


Bending strength: DIN 53452 ...........50 - 60 N/mm^2


Tensile strength: DIN 53455 ..............20 - 30 N/mm^2


E-module:  .....................................5500 - 6000 N/mm^2


3 g-ref.-no 106 01
22,25 g-ref.-no 106 02

.

AKEPOX
2040
Paste-like, high non-sag properties, for bondings
on vertical surfaces, levelling of big irregularities,
fixing of tiles, good adhesion on metal.

Working time: 45 - 55 min


Hardening time: 12 - 16 hrs


Bending strength: DIN 53452 .......... 40 - 50 N/mm^2


Tensile strength: DIN 53455 ..............20 - 30 N/mm^2


E-module:  .....................................8500 - 9000 N/mm^2

750 g-ref.-no 106 10
3 g-ref.-no 106 20
22,5 g-ref.-no 106 21


Via delle iare, 15 55045 PIETRASANTA (Lucca - ITALY)
Tel: 0584 792449 - Fax 0584 284503

-E-Mail: ceamspa@ceamspa.com

INDEX .

.CONTINUA